|
|
Readers
A full-service supplier: ExypnoTech can supply you with the suitable writing/reading unit for your particular RFID application. Regardless of whether you need mobile handheld reading units or stationary reading terminals and gates, we will be happy to advise you when selecting and buying your hardware components!
13.56 MHz RFID Reader / Writer ET-R1
Low Cost High Performance RFID Reader Module
The ExypnoTech ET-R is a low-cost high-performance RFID reader module for easy integration into custom products and equipment such as label printers, handheld data terminals, vending machines, barcode scanners or any other custom equipment.
This multi-protocol device can read and write most industry standard 13.56 MHz tags and smart labels.
General Reader Specifications
|
Tag compatibility (ISO-15693 –2 –3)
|
- Tag-it HF-1 (Texas Instruments)
- I-Code SLI (Philips)
- My-d SRF55V02/10P (Infineon)
- STM LRI 512 (ST Microelectronics)
|
Tag compatibility (ISO-14443*-A-B and orthers)
|
- Tag-it HF (Texas Instruments)
- I-Code1 (Philips)
- PicoTag 2K* (Inside Contactless)
- GemWave* (TagSys)
ISO-14443*-A –B
* Available 2003
|
Power supply
|
5 V or 1.2 V - 5 V operation
|
Supply current
|
60 mA @ 5 V, 150 mA @ 1.8 V, 50µA standby
|
RF Frequency
|
13.56 MHz
|
RF Modulation
|
10%/100% ASK (reader to tag)
FSK/Manchester (tag to reader)
|
RF Data rate
|
26.6 kbits/s (ISO15693)
105.9 kbits/s (ISO14443)
|
Host interface
|
Serial RS232 or TTL (Rx/Tx/GND)
9600, 19200, 38400 bits/s (N,8,1)
SPI bus (SDI/SDO/SCK) 3 MHz data rate
I2C bus (SDA/SCL) 400 kHz data rate
*USB
* Available 2003
|
FLASH MCU
|
Firmware upgrades for new protocols
|
Dimensions
|
38 mm x 40 mm x 4 mm
|
Read range
|
75 / 150 mm int/ext antenna (credit card)
|
Antenna
|
Internal or external 50-ohm antenna (ET-EA)
|
Compliance
|
FCC, CE, Industry Canada
|
ExypnoTech reserves the right to change specifications without notice.
Download Datasheet (pdf)
|
|
|
